Storm and Snowmelt Flood Cleanup in Eagan, MN
Water arriving from outside, by way of a window well, the garage or saturated soil, brings along whatever it crossed. The Eagan restoration team handles it as contaminated, removes what it soaked and dries the rest.
(888) 432-4933Outside water came in? Call
Floodwater is graded by where it has been, not by how clear it looks. Water from outside crosses soil, lawns and pavement, so it is handled as Category 3 from the moment it enters.
First steps for storm and snowmelt flood cleanup in Eagan
Stay out of floodwater
Hidden cords, sharp debris and live outlets make contaminated water dangerous.
Cut power when it is safe
Turn off breakers from a dry panel only, or wait for help.
Leave the HVAC off
Running the furnace can spread contaminated air through the house.
Photograph everything
Record water lines, damaged items and where the water came in.
How storm and snowmelt flood cleanup is handled in Eagan
The tech who does the walkthrough maps moisture before any equipment goes down, so the drying plan matches what is actually wet. Equipment stays until the readings say dry, not until it looks dry.
- 1
Contain and protect
Plastic barriers and air scrubbers keep the work area sealed.
- 2
Extract and remove
Water goes out, then soaked porous materials.
- 3
Clean and treat
Framing and hard surfaces get an EPA-registered antimicrobial.
- 4
Dry to the goal
LGR, air movers and desiccants run until readings match dry.
Eagan's record of heavy rain
From July 7 to 10, 2000, over eight inches of rain fell in three to five hours across northern Dakota County, with 11.33 inches in southeastern Eagan, and serious urban flooding followed in the south metro. A five inch rainfall on October 5, 2005 later drove sewer surcharges. Thomas Lake, Blackhawk Lake and the nearby Minnesota River round out the local water.
- Window wells that fill faster than they drain.
- Garage floors and entries where runoff pools.
- Saturated ground that pushes water through the foundation, which also leads to basement flooding cleanup.
How storm and melt flooding is cleaned up
The crew seals off the area first, then extracts water and removes the carpet, pad and board that floodwater soaked. Hard surfaces and framing are cleaned and sprayed with an EPA-registered antimicrobial while HEPA air scrubbers run. Drying follows with LGR units and air movers, plus desiccants for concrete.
- The furnace and air handler stay off so contaminated air does not travel.
- Upholstery, boxed paper and other porous contents are sorted, and many are discarded.
- Readings are logged each day until the dry reference is reached.
Why flood coverage is separate
Flood is commonly excluded from homeowner policies and covered under a separate flood policy, and sewer backup frequently needs its own rider. Check with your own insurer. Photographs and the moisture map help either way. A related loss is described on sump pump failure cleanup.
Storm and snowmelt flood cleanup across Eagan and nearby towns
The Eagan flood crew works across ZIPs 55121, 55122 and 55123, including the areas around Thomas Lake, Blackhawk Lake Park, Lebanon Hills Regional Park, Patrick Eagan Park and the Eagan Core Greenway.
The same service nearby: storm and snowmelt flood cleanup in Burnsville, Apple Valley, Bloomington.
Related water damage services in Eagan
Storm and Snowmelt Flood Cleanup questions in Eagan, MN
01Why call storm water contaminated?
It crosses lawns, soil and pavement before it enters, so it is graded Category 3 right away, however clear it looks.
02Can carpet and drywall be saved after a flood?
Rarely. Porous materials that floodwater soaked are usually removed, while hard surfaces and framing can be cleaned and dried.
03Does a homeowner policy cover flood damage?
Often not. Flood usually needs its own policy, and sewer backup may need a rider. Check with your own insurer.
04Has Eagan flooded like this before?
Yes. The July 2000 storm brought serious urban flooding to the south metro, with 11.33 inches falling in southeastern Eagan.
05What keeps melt and rain out of a lower level?
Slope soil away from the foundation, keep window wells clear, aim downspouts outward and maintain the sump.
06How many days does flood drying take?
Five to ten days is typical once contaminated materials are removed. Concrete, block and plaster add days.
Storm water in your Eagan home? Call.
Floodwater is Category 3 on entry, so containment and removal come before any drying.
Burnsville Water Damage Restoration · Burnsville, MN